Garage equipment sales and service specialists

computerised wheel aligner

Hofmann Megaplan upgrades its 3D aligner program to incorporate UltraHD camera technology

SSENCE HD brochure page 1 v2_smlThe new UHD Ssence 600 3D aligner from Hofmann Megaplan has arrived and it is another ‘game changing’ leap forward to our wheel alignment program. This flagship model is based on the Ssence 600, with the significant advantage of new UltraHD cameras, smaller, lightweight targets, and an updated interface. This combination delivers fast, precise results and is dramatically less susceptible to light pollution.

UHD – a few more pixels, so what?

The sensitivity of the Ultra HD cameras means they can pick up the minutest detail and accurately locate the much smaller reflective dots on the new targets, allowing them to be significantly reduced in size and weight. It also means the readings are less affected by light pollution. The new targets are less than a 1/3 of the size of it’s predecessors and weigh around 70% less, making them easy to handle and position, speeding up the alignment process.

Ssence – Updated Software

Finding a specific vehicle’s alignment settings is now much simpler and much more intuitive. Unlike some other systems there is no searching for several minutes to find the right vehicle. The system narrows the search as you type, saving crucial time in a busy workshop. There is also the option of adding the Hofmann Megatab allowing a clearer picture of any issues and allowing the technician the freedom to walk around the vehicle to carry out the work. The Megatab is a bespoke extension of the machine and not just a remote control application.

Stay on track – LiftTracker technology

You put the vehicle up on the lift, line up the cameras with the targets and then realise you need to get back into the vehicle. Time to start again, or is it? Once the Ssence has locked on to the targets, LiftTracker technology moves the beam in sync with the lift.  This allows the lift to be raised and lowered without it affecting the alignment readings and saving time in the testing process.  This is also particularly good when a problem is discovered and adjustments need to be made whilst the car is on the lift.

Less affected by light

One of the biggest complaints when carrying out vehicle wheel alignment is interference from light pollution. The workshop lights, and/or glare from sunlight, either through windows or through the workshop door can cause a discrepancy in the results, as the camera constantly searches for the right area to lock onto. The new HD camera system can collect a lot more data and is better equipped to distinguish between a greater number of light variants

Customer Friendly

Dimensions PrintoutAlignment to a paying customer can seem like a bit of a mystery but the UHD Ssence 600 puts the customer in the picture while the work is being carried out. This can be done on either a large 32″ screen attached to the machine or on the optional Megatab – giving complete piece of mind. If any adjustments are made, you can print out a before-and-after report for the customer.

“This is great step forward for our alignment range. We have listened to our customers‘ needs and come back with a feature-packed system for the busy workshop. Ever since we saw the first demonstration unit arrive from Austria for Automechanika, we’ve been struck by just how compact and accurate this unit is. As more customers see the value of a good alignment offering, it will become .” commented Mark Berrymann, Managing Director of Hofmann Megaplan.

 

To book a no obligation demonstration, please contact Hofmann Megaplan direct on 01480 891011

For more information please visit http://www.hofmann-megaplan.co.uk/

Successful Alignment Install – Edgefield coachworks (Edinburgh)

Edgefield Coachworks is an award winning body repair centre in Edinburgh.  They wanted to add a flexible, precise alignment system to their busy business and Hofmann Megaplan duly obliged with an Ecoline 88 4 wheel alignment system.

CCD or 4 wheel alignment systems, are a popular mobile system consisting of sensors mounted to each wheel. CCD aligner communicates with a PC via Bluetooth and compares the results to a database. The results are easy to see and once the alignment is complete a print off the data can be produced for you customers benefit. They require little specialist knowledge from the workshop as the interaction with the PC talks the technician through the process.

Prosimage2-4

  • More accurate than lasers
  • Less alignment knowledge is required for the technician than laser
  • Mobile so you can switch bays with a single aligner

Need to know:

  • Results can take as long as 10 minutes
  • An update to the data is required when new cars come onto the market
  • Busy centres can monopolise the aligners time

 

In short if you’re a small / medium sized set up, with multiple technicians with varying abilities, CCD has its benefits. The system automatically instructs the operator through the adjustments and gives feedback to the customer to build your relationship. They are mobile too, so allows flexible working throughout the workshop.

image1-4Edgefield Coachworks is an award winning body repair centre that has been operating in Edinburgh since May 2008 but coachbuilding has been at the centre of the Neish family for 3 generations. Their priority has always been on the quality of the work, which is why they’re one of Edinburgh’s leading Insurance Approved Accident Repair Centres. With a large facility to repair any make and model of car up to 7.5 tonnes including tyres, exhausts, brakes, suspension, servicing clutches, air con and vehicle geometric checks. They often do specialist work on a vast amount of supercars, primarily the TVR coimage3-3mmunity. 

If you’re in need of you wheels aligning, in Edinburugh, they would be more than happy to see you.

Unit 1 Eldin Industrial Estate, Edgefield Road, Loanhead, Edinburgh, EH20 9QX

T: 0131 440 3108

E: edgefield.coachworks@zen.co.uk

http://www.edgefieldcoachworks.co.uk

To find out more about how Hofmann Megaplan can help your domestic and commercial vehicle operation, visit the main Hofmann company website or to arrange a demo please contact our team on 01480 89-10-11

Feel Illuminated by Alignment – The Garage (Blackpool)

 

The Garage Blackpool by their own admission:

“are dedicated to providing superior value in all parts installed and services performed.  Quality and our desire for excellence are at the heart of this commitment. We use advanced technology and the quality products we offer create a positive car care experience.”

With that in mind, adding alignment to their list of services seemed to be the natural step. Once installed and the training complete on their Hofamnn Megaplan Ecoline 88 system, the ‘The Garage Blackpoool’ were then able to provide their customers with a service that gives an accurate reading of a vehicle’s wheel geometry and solve any issues caused by misalignment.

The Ecoline 88 is a CCD system (Close Coupled Device) and a popular mobile system, consisting of sensors mounted to each wheel. CCD aligner communicates with a PC via Bluetooth and compares the results to a database. The results are easy to see and once the alignment is complete a print off the data can be produced for you customers benefit. They require little specialist knowledge from the workshop as the interaction with the PC talks the technician through the process.

Pros:

  • More accurate than lasers
  • Less alignment knowledge is required for the technician than laser
  • Mobile so you can switch bays with a single aligner

 

Customer service is key for The Garage Blackpool;

“We strive to develop long-term relationships with customers, to provide the best customer service and the most appropriate solutions for your auto care needs. In addition, we always try to answer your questions and explain our work to you so you feel comfortable every step of the way.”

Customer feedback is key to maintaining their trust and communicating your work. A print out provided after every alignment on the Ecoline 88 provides a helpful colour coded adjustment charts instantly show the problem areas, and where the adjustments were made.

To get you car’s wheel geometry checked in the Blackpool area contact The Garage Balckpool for more information about their services. Their experienced customer service team can help you find just what you need and can advise you on the additional options.

98/100 Dickson Road, Blackpool, Lancashire FY1 2BU

T:01253 620180/2

E:: sales@thegarageblackpool.co.uk

https://www.thegarageblackpool.co.uk/

 

To find out more about how Hofmann Megaplan can help your domestic and commercial vehicle operation, visit the main Hofmann company website or to arrange a demo please contact our team on 01480 89-10-11

Have I got room for a 3D aligner?

The common assumption is if you have a small garage 3D alignment might not be for you. Not true.

If you have a four post lift or a pit, you still can have a 3D alignment system installed.

Hofmann Megaplan Ssence 400

 

The latest technology 3-D aligners work with a pair of static cameras mounted in front of, or laterally to the lift.  These take multiple images of the targets which fix to the vehicle’s wheels.  They are suited to higher-volume users such as fast-fit centres and tyre bays due to their greater speed.

Pros:

  • High speed
  • Unmatched accuracy
  • Easy and fast to operate

Need to know:

  • Requires a certain amount of space with a fixed set up in the workshop
  • Will need the database updating
  • Most expensive of the systems

In short: For established or aspiring alignment centres where speed and customer information is the priority. They do require the right amount of space and set up. HD systems will bring the size of the targets down but it is worth checking with your supplier exactly what your requirements are.

Telephone: 01480 8-9-10-11

To email us CLICK HERE

Alignment made easy – Hi-performance (Sunderland)

Having your car tyres aligned has a number of key benefits which would ultimately mean you saving on running costs and improving vehicle safety.

Hi-Performance Auto Centre (Sunderland) have just taken delivery and installation of their new Hofmann alignment system installed by one of our specialists. The ecoline 88 complete with ‘GrabClamps’ which mean that the measuring head is mounted with 3 nylon locators on the rim, ensuring there is no metal to metal contact leaving your precious alloys unmarked.

Main reason for wheel alignment;

1.  Increase Fuel Efficiency. Correct alignment mean your wheels are working together and  not against each other, so all the engine’s efforts go into propelling the car – thus using less fuel. Great as prices keep increasing.

2.  Increase Tyre Life. Your tyres are one of the most expensive ongoing costs you’ll experience and with most families running a minimum of two sometimes three vehicles, it is important to get the most from them. For the same reason as above tyres wear better if they are not in conflict with each other.

3.  Experience Smoother Driving. When your car’s wheel alignment is not right you will usually notice that your car drifts slightly even though your steering wheel is pointing straight ahead. Constantly adjusting your steering to overcompensate for bad alignment is inefficient, tiring and distracting (or dangerous)

4.  Reduce Expensive Repairs on other parts of the car. Driving with a bad alignment causes the parts in your car to wear unevenly and prematurely. Each time you hit a pothole or bump in the road, your steering and suspension “feel it”. When your tyres aren’t evenly helping with the impact, certain areas of these systems take the hit harder than others, causing them to fail sooner. Failure = more cost.

 

Compact and extremely simple to use, the ecoline 88 takes advantage of the very latest infra-red and wireless technology to provide a high-spec system.

The ecoline 88 is based on the same platform as the 58, but includes some luxury additional features such as 3-point ‘GrabClamps’, heavy duty mechanical turnplates and advanced measuring heads making full 4 wheel alignment even easier and faster.

 

So if the parts on you car, especially the tyres are wearing unnecessarily quickly or you are fighting to keep the car straight the next question should be “where do I get my wheels aligned” – pick an expert who chooses equipment that is right for the job and have had expert training.

On-Site Demonstrations of Ssence 3D Alignment System

We are pleased to advise that we have taken delivery of the first of our brand new ‘3D Demonstration Unit’.

As well as demonstrating our hugely popular ecoline systems, we are now able to perform an on-site demonstration of our 3D aligner model.

What’s more, is that due to the design of our demo unit we are actually able to provide accurate readings – no excuses about not being calibrated or unable to perform a full demo!

moneyWhat’s the real cost of owning a 3D Wheel Aligner, and how much income could your business make from this revolutionary piece of garage equipment? Find out by using the Hofmann Megaplan Revenue Calculatorclick here for more details….

Find out more about our 3D Wheel Alignment Systems on the main company website or to arrange a demo please contact our team on 01480 89-10-11